Activated Carbon Filter
Usually (if the water is not too contaminated) the cartridge can be used up to 4 to 6 months before it needs to be replaced. Regardless, if the filter is used every day, change to a new cartridge within 6 months.
Usually (if the water is not too contaminated) the cartridge can be used up to 4 to 6 months before it needs to be replaced. Regardless, if the filter is used every day, change to a new cartridge within 6 months.
Ready for use upon opening. Screws into the second base of your water filter.
Ready for use upon opening. Screws into the second base of your water filter.
Activated Carbon Filter
Usually (if the water is not too contaminated) the cartridge can be used up to 4 to 6 months before it needs to be replaced. Regardless, if the filter is used every day, change to a new cartridge within 6 months.
Usually (if the water is not too contaminated) the cartridge can be used up to 4 to 6 months before it needs to be replaced. Regardless, if the filter is used every day, change to a new cartridge within 6 months.
Ready for use upon opening. Screws into the second base of your water filter.
Ready for use upon opening. Screws into the second base of your water filter.
Activated carbon utilises a vast surface area to capture over 80 different contaminants found in tap water from heavy metals to PFAS. This filter contains a large 20cm block of premium grade carbon to effectively filter your water.
Unscrew the silver casing and then the filter cartridge (counterclockwise). Clean the inside of the filter house at this time. Screw the new cartridge in making sure to press firmly down as you screw the filter to connect the thread correctly. Do not over-tighten as the gasket seals effectively.
Activated carbon utilises a vast surface area to capture over 80 different contaminants found in tap water from heavy metals to PFAS. This filter contains a large 20cm block of premium grade carbon to effectively filter your water.
Unscrew the silver casing and then the filter cartridge (counterclockwise). Clean the inside of the filter house at this time. Screw the new cartridge in making sure to press firmly down as you screw the filter to connect the thread correctly. Do not over-tighten as the gasket seals effectively.
Frequently Asked Questions
The activated carbon filter screws into base two of your system. Do not over tighten, the gasket seals effectively.
The activated carbon filter screws into base two of your system. Do not over tighten, the gasket seals effectively.
Run water through the system continuously for 2 minutes after changing.
Run water through the system continuously for 2 minutes after changing.
They may be a little tough if you haven’t unscrewed them in a while. Try running the base under warm water and re-try. Once open, apply a small amount of vegetable oil to the screw base to make it easier to unscrew next time.
They may be a little tough if you haven’t unscrewed them in a while. Try running the base under warm water and re-try. Once open, apply a small amount of vegetable oil to the screw base to make it easier to unscrew next time.